Centrex Features

Consultation Hold
Three Way Conference
Call Transfer
These three features work together. Consultation Hold allows the transferring party to talk privately with the destination before transferring the call, or establishing a Three Way Conference. These features are activated by pressing the Conference key.

Hunting
A call completion feature that searches for an idle line to complete a call. The available lines can be defined in a hunt group. Three types of hunting are available:

• DHN - Directory Number Hunting
• MLH - Multi-line Hunting
• DLH - Distributed Line Hunting

Call Forwarding
This feature eliminates unanswered calls by forwarding calls that are not answered within a specified number of ringing cycles to a pre-programmed destination.

• CFB - Call Forward Busy
• CFD - Call Forward No Answer
• CFW - Call Forward
• CFD unrestricted - Call Forward No Answer - unrestricted

Call Hold
This feature allows the user to hold a call manually on the loop by pressing the Hold key and perform other tasks, originate another call, call pickup, etc.

Call Pickup
Call Pickup allows a station to answer calls incoming to another station within a predetermined call pickup group. Call Pickup is activated by pressing the Call Pickup key.

Speed Call
This feature allows a user to place calls to a previously designated list of frequently dialed numbers. This is activated by dialing a speed calling code or pressing the Speed Call key. Short lists consists of a maximum of 8 stored numbers. Long lists consists of a maximum of 70 stored numbers.

Ring Again
This feature allows the user to monitor a busy DN (directory number) and notify the user when the called station becomes free. When the busy line becomes free, the user is notified by a notification tone and the flashing of the Ring Again indicator. Ring Again is activated by pressing the Ring Again key upon hearing the busy tone.

Call Waiting
With this feature an incoming call encountering a busy Meridian business set receives ringing while the called station receives call waiting notification consisting of two bursts of buzz tone (optional) or the call waiting lamp will flash. Call Waiting is activated by pressing the Call Waiting key. This will connect you to the new party calling and place the other on hold.

Automatic Line
This feature can be assigned to individual stations and when a station goes off hook (for a predetermined time limit) a connection is automatically established to a predetermined location.

Call Park
Direct Call Park
This feature is used to park a call against his/her directory number or another station number. The parked call can be retrieved by any station. This feature is activated by pressing the Call Park key.

Last Number Redial
This feature enables the user to redial the last number called from the set. This feature is activated by pressing a single key or a designated access code.

Station to Station Calling
This feature allows calls to other stations without the use of an attendant by dialing a two through seven digit number.

Paging Access
This feature allows you to access an stand alone paging system.

Conference 6
This feature allows activation of up to 6 conferees to be added on conference calls. This feature is activated by pressing the conference key each time a conferee is added.

Make Set Busy
This feature allows a station to be inactive and all incoming calls to receive a busy signal. This feature is activated by pressing the busy key.